You can also order an Module version of this product here.
The Cimetrics B6000 is a BACnet/IP to BACnet/MSTP Router. It helps route communications between BACnet/IP and BACnet/MSTP local area networks. This allows BACnet/IP devices to communicate with BACnet devices on a BACnet/MSTP network. The Ethernet connection conforms to the BACnet/IP standard which is complemented by many network friendly features such as DHCP and password protected browser based setup screens. This device requires no mapping because ALL data on the one side (for example, the BACnet/IP side) is transparently passed to the other side (BACnet MS/TP) and vice versa. Configuration is easy and the hardware has been designed to professional electrical standards.
The B6000 has termination jumpers on the inside of the unit to provide for flexible bias and termination settings.
IEEE 802.3 10/100 Mbps
10BaseT, 100BaseT, RJ45 connectors
100m (max) CAT5 cable length.
LEDs: link and activity as labelled.
ANSI/ASHRAE 135 (ISO 16484-5)
9600, 19200, 28800, 38400, 57600, 76800, 115200 bps data rate
EIA-485 twisted pair bus physical layer 1200m (abs max) cable length (better rule of thumb: nodes x length in km x speed in kbaud x number of bias, termination flaws should not exceed 30)
International power supply.
DIN rail mounting kit.
Rack mounting kit.
External network surge protector.
The Cimetrics B6000 is a BACnet/IP to BACnet/MSTP Router. It helps route communications between BACnet/IP andBACnet/MSTP local area networks. This allows BACnet/IP devices to communicate with BACnet devices on a BACnet/MSTPnetwork.
The B6000 can be used along with the Cimetrics BAS-o-matic Protocol Analyzer to capture, decode and analyze communications on a BACnet/MSTP network. This is very useful for troubleshooting.