Note: You will need to have the EasyBAC SDK to use this.
This module is an elongated Ethernet connector which contains a powerful microprocessor with all memory and software required to support connection to a state-of-the-art Building Automation System network. Design your circuit board so this module can fit in and connect to the serial port of your host microprocessor (TTL level RS232).
The EasyBAC software system works like this:
Host microprocessor interface:
Power: 3.3VDC at 100-270 mA (idle to communication)
Weight: 9.6 grams (0.34 oz)
Material: Metal shell, thermoplastic case
Operating temperature range: Commercial, 0°C to +70°C (32°F to 158°F)
Storage temperature range: -40°C to +85°C (-40°F to 185°F)
Relative humidity (operating): 5% to 95% non-condensing
Non-operational shock: 500 g's
Non-operational vibration: 20 g's
Dimensions: 33.9 x 16.25 x 13.5mm (1.33 x 0.64 x 0.53 in) without pins and tabs
The EasyBAC module hardware is produced for Cimetrics by Lantronix.
The EasyBAC module is an elongated Ethernet connector with a powerful built-in microprocessor and has all of the memory and software required to support connection to a BACnet/IP network.
Users can quickly create a BACnet/IP device as long as their circuit board is designed to accommodate this EasyBAC module. The module connects to the serial port (UART) of the host microprocessor.
Once the circuit board is designed to accommodate the EasyBAC module, minimal programming is required to make the device communicate using BACnet/IP. This makes creating BACnet/IP compliant devices a snap !