![]() |
This product connects BACnet/IP and BACnet MS/TP.
It does what it is supposed to do... EASY setup and great compatibility. Customers say..."This is as EASY as it gets !" - Jeff Sturgis (Alpha Heating and Cooling) |
$795.00 |
![]() |

The B6040 enables Building Automation systems to connect and communicate with the following
Once connected, these devices can be a part of the Building Automation System and can be controlled from the same central Building Automation work station.
The Web Services connection conforms to XML/SOAP and WSDL standards which are supported by almost all Enterprise software vendors. This allows an easy method of controlling and monitoring the devices connected to the B6040 to the Enterprise and Building Automation Systems Network without needing to know anything about the BACnet protocol.
The BACnet/IP connection conforms to the latest BACnet 2004 standard and is a 3rd generation protocol stack created by the Cimetrics development team. Mapping between the BACnet/IP network and the Web Services calls is done using password protected browser setup screens.
Using the Cimetrics B6040, 110v devices and Sensors can be connected to the Building Automation System.
The B6040 enables innovative applications come together with existing Building Automation systems so you can offer solutions which save money and improve building comfort. The I/O follows standard relay and inputs practice. This allows an easy method of controlling and monitoring point devices without needing to know details about the BACnet protocol.
The BACnet/IP connection conforms to the latest BACnet 2004 standard and is a 3rd generation protocol stack created by the Cimetrics development team. Mapping between the BACnet/IP network and I/O is pre-configured, with the web user interfacing allowing for units and descriptions for each I/O point to be added.

Overall:
Power: 120VAC at under 1A, DC at 12VDC at 12W
Operating temperatures: 0 to 40C
Storage temperature: -20 to 80C
Dimensions: 102 x 127 x 26 mm (4.0 x 5.0 x 1.0 inches) [without feet]
Relative Humidity: 0-90% @40C non condensing
Physical protection: IP30 DIN EN 60529 (VDE 0470) (no entry of 2.5mm probe, NOT waterproof)
System LED: power as labelled ON=OK
Relay Ratings:
Relay Ratings - 250V AC/DC 5.0 Amp
Digital Inputs:
Grounding Contact = logic 1
Ethernet:
IEEE 802.3 10/100 MBPS
10BaseT, 100BASETX phsyical. RJ45 connectors
Half/Full duplex
100m (max) CAT5 cable length.
LEDs: link and activity as labelled.
Options:
International power supply.
DIN rail mounting kit.
Rack mounting kit.
External network surge protector.
