Cimetrics.ru

Create PDF Print

How do I log in?

Answer

Connect the B/IP to MS/TP Router to an Ethernet hub, and run another Ethernet cable from that hub to your laptop or PC. Make sure that the laptop or PC is the only other unit in this small LAN. NOTE: If you do not have a hub, you can use a "crossover cable" to connect directly between the B/IP to MS/TP Router and your laptop.

There are two ways to set your computer so that it can communicate with the B6000 Router.

1) If your PC is already set to use DHCP, then just connect to the Eplus device on an isolated network (the Eplus will supply your PC with an IP address using DHCP) or...

2) Set your PC's IP address to 192.168.88.90 with a subnet mask of 255.255.255.252.

Then:

Open your browser and enter the following URL:

http://192.168.88.89

You will be prompted to login:

Default User = admin
Default password = admin

From within the browser interface you can change all settings in the entry fields to configure your router

For improved access security, you should change your password from the default values. Make sure you SAVE your new password! When you press "Save Configuration" and “confirm” then the configuration process is completed.

Now disconnect your laptop and connect the B/IP to MS/TP Router into your BACnet network.

Category

Eplus - B/IP to MS/TP Router