Connect the B/IP to B/WS Gateway Ethernet connector (marked Web Services) to an Ethernet hub, and run another Ethernet cable from that hub to your laptop or PC. Make sure that the laptop or PC is the only other unit in this small LAN. NOTE: If you do not have a hub, you can use a "crossover cable" to connect directly between the B/IP to B/WS Gateway and your laptop.

There are two ways to set your computer so that it can connect to the B/IP to B/WS Gateway .

1) Setup the PC as a DHCP client (the B/IP to B/WS Gateway contains a web server with DHCP) and obtain an IP address from the B/IP to B/WS Gateway or alternatively you can

2) Set your PC's IP address to 192.168.88.90 with a subnet mask of 255.255.255.0.

Open your browser and enter the following URL:

http://192.168.88.89

You will be prompted to login:

User = admin password = admin


From within the browser interface you can change all settings in the entry fields to configure your router

For improved access security, you should change your password from the default values. Make sure you SAVE your new password! When you press "Save Configuration" and “confirm” then the configuration process is completed.

Now disconnect your laptop and connect the B/IP to B/WS Gateway into your BACnet networks.