In order to test the BACnet/IP communications of the EasyBAC, the following need to be done

- Install the BACnet Explorer that is on your CD

- The IP address of your pc must be in the same IP subnet of the EasyBAC

- Configure the BACnet Explorer to use BACnet/IP
.. If you are not sure, please visit the FAQ for the BACnet Explorer

- Upon installation of the BACnet Explorer, have the EasyBAC attached to the PC either directly via a crossover cable or via hub.

- Starting the BACnet Explorer and double clicking on "BACnet Global Internetwork" should display the EasyBAC and its Objects and properties.